NoxTape – Roof Seam & Joint Reinforcement Tape (50 ft x 6 in)

Reinforce every seam, joint, and crack before coating — NoxTape is your roof's first line of defense against leaks.

NoxTape is a heavy-duty fabric reinforcement tape designed to be embedded into Noxor roof coatings for added strength and waterproofing at critical roof areas. Apply it over seams, joints, cracks, panel overlaps, and flashing transitions before or during your coating application to create a reinforced, leak-proof seal that won't crack or separate over time.

50 linear feet of coverage — enough to reinforce all the seams and joints on most residential roofs.

Key Features

• 50 linear feet x 6 inches wide — covers seams, joints, and transitions across an entire roof
• Fabric reinforcement — embeds into wet coating to create a stronger, crack-resistant membrane
• Prevents leaks at weak points — seams, joints, and panel overlaps are where most roof leaks start. NoxTape reinforces these areas
• Works with all Noxor coatings — Noxseal, Pro Rust, and NoxSilicone 55
• Easy to apply — lay into wet coating, smooth out, and top-coat over it

When to Use NoxTape

Use NoxTape at every transition point on your roof:

• Metal panel seams and overlaps
• Flashing-to-roof transitions
• Around vents, pipes, and penetrations
• Cracks and splits in the roof surface
• Flat roof seams and membrane joints
• RV and trailer roof seams
• Any area where two surfaces meet

How to Apply

1. Apply a base coat of Noxor coating (Noxseal, Pro Rust, or NoxSilicone 55) to the seam or joint area
2. While the coating is still wet, lay NoxTape over the seam and press it firmly into the coating
3. Smooth out any air bubbles or wrinkles
4. Apply a top coat of the same coating over the tape, fully embedding it
5. Allow to cure per the coating's instructions

The result is a reinforced, multi-layer waterproof seal at every critical junction on your roof.

What's in the Box

• 1x NoxTape Reinforcement Tape Roll (50 linear feet x 6 inches wide)

Pro Tip

Don't skip the tape on seams and joints. Coating alone will protect flat surfaces, but seams are where roofs move, expand, and contract the most. NoxTape adds the structural reinforcement these areas need to stay sealed for the full 15-year lifespan of your coating.

🇺🇸 FREE SHIPPING on all orders across the USA